- Acid and Caustic Free
- Non-Butyl, Non-Solvent
- Cuts Grease and Fats
- Non-Emulsifying
- Non-Corrosive
- Non-Skin Irritant
- Non-D.O.T. Regulated
- Produces Thick Foam
- USDA and FDA Approved
- Kosher Approved
- MIL PRF 88570D, Type II & IV
- MIL-C-25769-H
- Meets Boeing D6-17487P
Available Sizes:
- 5 gal
- 55 gal
- 275 gal
Downloads:
- Product Information Sheet (pdf)
- Material Safety Data Sheet (pdf)
Acids, caustics and solvents have long been used to remove scaling, grease and other build up from vehicles, equipment and buildings. While these chemicals are effective cleaners, they corrode and damage nearly everything they touch, not to mention the danger they pose to personnel who use them.
A synthetic acid, SynTech®, has replaced the harshest acids in ready mix, marine, water treatment, waste, and other industries for years. Our non-butyl, non-solvent cleaner/degreaser, SynClean, replaces solvents and caustics in restaurants, hotels, airports and food processing. What’s more, we do more than replace these dangerous chemicals, we outperform them.
Omni represents the first formulation that offers the full power of SynTech® and SynClean in a single cleaner. And even though the pH of SynTech® and SynClean are 1 and 11 respectively, their synthetic makeup allows them to be combined without neutralizing the other’s effect.
The result is a highly potent and concentrated liquid that can be used to safely clean any surface. At lower dilutions it easily removes heavy build ups of concrete, grease and scaling. At higher dilutions Omni can be used as a vehicle wash.
Omni also contains detergents, wetting agents, sequestering agents, penetrates, rust and corrosion inhibitors making it a true all-in-one cleaner. Use Omni in any enviroment where previously acids, caustics, solvents or any combination of the three were needed. Omni will clean multiple stains and buildup in a single, simple step.
Omni carries NSF certifications A1, A2, A4, A8 and C1, making it ideal for the food processing industry.
Omni meets or exceeds military specifications MIL PRF 85570 D, Type II & IV, MIL-C-25769-H, and Boeing D6-17477P.
Industries:
Green Endeavor Inc. (GEI) is a direct distributor of Environmental Manufacturing Solutions, LLC (EMS). EMS is the manufacturer of all products marketed by GEI and listed on our website. EMS carries all U.S. related certifications, approvals and registration of the individual products. Green Endeavor does not assert that we maintain any U.S. related designations for any products marketed or listed on our website. Please reference EMS website (www.enviromfg.com) for any and all U.S. related designations for each product in question. Green Endeavor Inc. is committed to only using safe surfactants in all of our formulated products and will only sell products that contain safe surfactants.
A synthetic acid, SynTech®, has replaced the harshest acids in ready mix, marine, water treatment, waste, and other industries for years. Our non-butyl, non-solvent cleaner/degreaser, SynClean, replaces solvents and caustics in restaurants, hotels, airports and food processing. What’s more, we do more than replace these dangerous chemicals, we outperform them.
Omni represents the first formulation that offers the full power of SynTech® and SynClean in a single cleaner. And even though the pH of SynTech® and SynClean are 1 and 11 respectively, their synthetic makeup allows them to be combined without neutralizing the other’s effect.
The result is a highly potent and concentrated liquid that can be used to safely clean any surface. At lower dilutions it easily removes heavy build ups of concrete, grease and scaling. At higher dilutions Omni can be used as a vehicle wash.
Omni also contains detergents, wetting agents, sequestering agents, penetrates, rust and corrosion inhibitors making it a true all-in-one cleaner. Use Omni in any enviroment where previously acids, caustics, solvents or any combination of the three were needed. Omni will clean multiple stains and buildup in a single, simple step.
Omni carries NSF certifications A1, A2, A4, A8 and C1, making it ideal for the food processing industry.
Omni meets or exceeds military specifications MIL PRF 85570 D, Type II & IV, MIL-C-25769-H, and Boeing D6-17477P.
Industries:
Green Endeavor Inc. (GEI) is a direct distributor of Environmental Manufacturing Solutions, LLC (EMS). EMS is the manufacturer of all products marketed by GEI and listed on our website. EMS carries all U.S. related certifications, approvals and registration of the individual products. Green Endeavor does not assert that we maintain any U.S. related designations for any products marketed or listed on our website. Please reference EMS website (www.enviromfg.com) for any and all U.S. related designations for each product in question. Green Endeavor Inc. is committed to only using safe surfactants in all of our formulated products and will only sell products that contain safe surfactants.